2 Post Car Lift L1100 Auto Truck Hoist 10,000 lb
$2,500.00 $599.00 Add to cart
Sale!

2 Post Car Lift L1100 Auto Truck Hoist 10,000 lb

$599.00

-76%
  • Free worldwide shipping on all orders
  • 30 days easy returns
  • Order yours before 2.30pm for¬†same day dispatch
Guaranteed Safe Checkout

Free worldwide shipping on all orders over $50

  • 30 days easy returns
  • Order yours before 2.30pm for¬†same day dispatch
Guaranteed Safe Checkout

Warranty:

  • 12 months warranty ! When you choose us, you will get the BEST warranty on eBay.
  • Most of the sellers don‚Äôt provide or only provide warranty for those parts for 3 or 6 months, 1 year at most. Please compare with others before you make the decision. Get into our shop and you will see the details of terms and conditions, especially the best warranty!

Auto Car Lift  L 1100

Features   220V  60HZ  1PH   3HP MOTOR

‚ÄĘSymmetrical Arm Assembly:

Straight Front / Rear 2 Stage reach from 30 1/4″ to 49 1/5″

Equal length of front and rear arm design

Drop-in type lifting pads and truck adapters included

Safety Mechanism:

Double Point Safety Lock Release
‚ÄĘAutomatic¬†arm¬†lock¬†restraints
‚ÄĘRelief¬†valve¬†built¬†in¬†power¬†pump¬†to¬†prevent¬†overloading
‚ÄĘDoor¬†guards¬†protection¬†rubber
‚ÄĘUp-limit¬†switch¬†to¬†protect¬†cylinders¬†working¬†stroke¬†used¬†in¬†safe¬†length¬†scope
‚ÄĘHeavy¬†duty¬†5/16‚Ä≥¬†diameter¬†cable¬†and¬†4.56‚Ä≥¬†pulley¬†reduce¬†high¬†stress¬†on¬†synchronization¬†process¬†and¬†increase¬†cable¬†life
‚ÄĘStiffened¬†base¬†plate¬†5/8‚Ä≥¬†thickness
‚ÄĘUltra¬†high¬†molecular¬†self¬†lubricating¬†nylon¬†slider¬†ensures¬†carriage¬†smooth¬†moving¬†up¬†and¬†down
‚ÄĘAnchor¬†bolts/mounting¬†hardware¬†included

Control System
‚ÄĘLifting¬†operation¬†by¬†pressing¬†‚ÄúUP‚Ä̬†button¬†on¬†motor
‚ÄĘManual¬†lowering¬†operation¬†by¬†pressing¬†lever
‚ÄĘRelief¬†valve¬†built¬†in¬†power¬†pump¬†to¬†prevent¬†overloading
‚ÄĘ1¬†sets¬†truck¬†adapters¬†included
‚ÄĘLifting¬†Capacity:¬†10,000¬†lbs
‚ÄĘThe¬†overall¬†Height¬†¬†145-5/8‚Ä≥
‚ÄĘThe¬†overall¬†Width¬†¬†133-1/4‚Ä≥
‚ÄĘColumn¬†Width¬†¬†¬†¬†10.62‚Ä≥
‚ÄĘBase¬†Width¬†¬†¬†18.89‚Ä≥
‚ÄĘColumn¬†Thickness¬†of¬†Steel¬†¬†¬†¬†3/16‚Ä≥
‚ÄĘCarriage¬†Thickness¬†of¬†Steel¬†¬†¬†15/64‚Ä≥
‚ÄĘArms¬†Thickness¬†of¬†Steel¬†¬†¬†¬†¬†15/64‚Ä≥
‚ÄĘFront Arm¬† ¬† 30.7‚Ä≥ to 48‚Ä≥
‚ÄĘRear Arm¬† ¬† ¬†30.7‚Ä≥ to 48‚Ä≥
‚ÄĘMin¬†pad¬†height:¬†3-7/8‚Ä≥
‚ÄĘLift¬†height¬†max:¬†78-7/8‚Ä≥
‚ÄĘDrive-thru¬†width¬†clearance:¬†100‚Ä≥
‚ÄĘTime¬†to¬†full¬†rise:¬†20-60¬†sec
‚ÄĘShipping¬†Weight:¬†1460¬†lbs

Site Selection
Before installing your auto lift, check the following:
‚ÄĘ Lift Location: Always use architect‚Äôs plans when available.¬† Check layout dimension against floor plan requirements making sure adequate space is available. ¬†Your lift
requires a 220v, 30amp, single phase, grounded electrical source.  There should be room enough to operate the lift in a safe manner and without restrictions.
‚ÄĘ Overhead Area: The area where the lift will be located should be free of overhead obstructions such as heaters, building supports, electrical lines, doors, lights, etc.
‚ÄĘ Floor Area: Visually inspect the site where the lift is to be installed and check for cracked or defective concrete.

Floor Requirements
‚ÄĘ A level floor is suggested for proper installation and level lifting.¬† Small differences in floor slopes may be¬†compensated for by proper shimming.¬† If a floor is of questionable slope, consider a survey of the site and/or the possibility of pouring a new level concrete slab.
‚ÄĘ New concrete must be adequately cured for at least 30 days.

DO NOT install auto lift on any asphalt surface or any surface other than concrete.
DO NOT install auto lift on expansion seams or on cracked or defective concrete.
DO NOT install auto lift on a second/elevated floor without first consulting building architect.
DO NOT install auto lift outdoors unless special consideration has been made to protect the power unit from inclement weather conditions.

Concrete Specifications
All models MUST be installed on 3,000 PSI reinforced concrete only.  Additional concrete requirements will vary by lift.

8,500 lbs ‚Äď 10,000 lbs lifts: 4‚Ä≥ Minimum Thickness
11,000 lbs ‚Äď 15,000 lbs lifts: 6‚Ä≥ Minimum Thickness